Arknights: Endfield Guide | How to Get Cryston Component

Here’s a guide on how to get Cryston Component in Arknights: Endfield.

Game Guide by Ragib Rawnak on Feb 19, 2026

To craft Level 50 Gear, you must have Crystal Components. These parts are a requirement for equipment with a purple rank. You can construct a factory to produce them automatically. This layout uses four Depot Unloaders to feed the system.

Placing the First Units

Start by lining up four Depot Unloaders. You need to set two of these to drop Originium Ore. Set the other two to drop Amethyst Fiber.

Place a Shredding Unit one block in front of every unloader. Link them together with Conveyor Belts. Put an Electric Pylon on the far left. Place another Electric Pylon on the right side, but leave a small space.

Arknights: Endfield, Guide, How to Get Cryston Component

Grinding and Refining

Now you need two Grinding Units. Set them down two blocks away from the shredders. Make sure they line up. Connect the belts from the shredders to the ports on the right side of the grinders in Arknights: Endfield.

Put two Refining Units in front of the Grinding Units. Leave a gap between the machines. Add one more Electric Pylon for power. You also need a third Refining Unit placed right in front of the others.

Arknights: Endfield, Guide, How to Get Cryston Component

Growing Sand Leaf

You have to build a farm on the left side of the area. Put a Planting Unit one block away from your grinders. The arrows on the machine must face your power source. Place a Seed Picking Unit across from it.

Leave a gap. Use Conveyor Belts to make a circle between these two tools. To get powder, put a Shredding Unit near the grinders. Connect a belt from the Planting Unit to this new shredder.

Arknights: Endfield, Guide, How to Get Cryston Component

Building the Components

Switch to the top view to finish the belt paths. Run belts from the Sand Leaf shredder into both Grinding Units. One belt has to go over the others like a bridge in Arknights: Endfield.

Link the Grinding Units to the Refining Units. Place the Gearing Unit so it touches the back of the Refining Unit.

Leave a space on the left side. Run the belts into the Gearing Unit. It needs 10 of each item to create one Crystal Component. Put a Protocol Stash at the end. Change the setting to Belt Free Transfer so the parts go to your core.

Also, check our Arknights: Endfield Review and other guides below: