Arknights: Endfield Guide | How to Build Automantic Farm

Here’s a guide on how to build an Automantic Farm in Arknights: Endfield.

Game Guide by TauxicPandA on Feb 20, 2026

This guide shows you how to build an automated farm for Buckflower Powder and Sandleaf Powder. You will need a lot of these materials when you reach the end of Valley 4.

This design creates an infinite loop, so once you start it, the machines keep producing without you needing to add more seeds.

Arknights: Endfield, Guide, How to Build Automantic Farm

Building the Farm Loop

To start, switch to top view mode so it is easier to see where the machines go. Place one Seed Picking Unit right in the middle. Put a Planting Unit on either side of it. Make sure the arrows on the Seed Picking Unit face down, while the arrows on both Planting Units face up.

Connect the output of the Seed Picking Unit to both Planting Units. This machine takes one plant and turns it into two seeds. One seed goes to the left, and one goes to the right.

You then connect the output of the left Planting Unit back into the Seed Picking Unit. This creates a loop that keeps the farm running forever. The right Planting Unit does not loop back; its output goes toward your production line in Arknights: Endfield.

Arknights: Endfield, Guide, How to Build Automantic Farm

Power and Processing

Place an Electric Pylon near the center to power all three machines. To start the process, put some Buckflower or Sandleaf into the middle Seed Picking Unit.

It will start making seeds and feeding the other machines. You can speed this up by putting extra seeds directly into the Planting Units at the start.

Next, place a Shredding Unit one block away from the right-hand Planting Unit. Run a conveyor belt from that unit into the shredder to turn the plants into powder. Finally, place a Protocol Stash against the Electric Pylon to store your items.

Use three conveyor belts to lead from the shredder into the stash. This is important because Sandleaf creates three powders for every one leaf, and you need the extra belts to handle the speed in Arknights: Endfield.

Arknights: Endfield, Guide, How to Build Automantic Farm

Replicating the Build

Once you have one farm working, you do not need to build them piece by piece anymore. Use the bulk action tool in top view to draw a box around the entire setup.

You can then use Ctrl + C to copy it and paste the design as many times as you need in your base. Just remember that every time you place a new copy, you must add a few plants or seeds to the machines to kickstart the loop in Arknights: Endfield.

Also, check our Arknights: Endfield Review and other guides below: