Silent Hill: Townfall Guide | CCTV Puzzle

The CCTV Puzzle in Silent Hill: Townfall takes place in the SWDP – Different Control Room during Part 6. Use the CCTV cameras to identify equipment IDs, enter the corresponding commands into the Remote Systems Control console, and complete several tasks around the facility.

Open Valve B

Use the CCTV monitor to find Camera 005.

• Switch to Camera 005.
• Look toward the Valves A–C area.
• Find Valve B.
• Read the ID displayed on the valve.
• Enter the corresponding Open → Valve B → 254 command into the console.

Valve B's correct ID is 254.

Start Filter A

Next, use the CCTV monitor to find Camera 000.

• Locate Filter A.
• Check the desk beside the equipment for its ID.
• Enter Start → Filter A → 103 into the console.

The Filter A ID is 103.

Get the AUX Key

After completing the first two commands, check the locker beside the Remote Systems Control console.

Enter 0825 into the locker.

Take the AUX Key.

Use the elevator to reach the AUX Room.

Use the AUX Key to enter the room.

Find the AUX Disk.

Insert the disk into the computer.

This starts the Auxiliary Lines Puzzle.

Solve the Auxiliary Lines Puzzle

Set three groups of switches according to the white lines shown on the AUX computer.

Line 1

Read the switches right to left:

Up → Down → Up → Up → Down → Up → Down → Up → Up

Line 2

Read the switches right to left:

Up → Down → Down → Down → Up → Down → Down → Up → Up

Line 3

Read the switches left to right:

Down → Up → Up → Up → Down → Up → Down → Up

When each line is correctly configured, its status light turns green.

Flush Aux Line B

Return to the Control Room after completing the Auxiliary Lines.

Check the Remote Systems Control document beside the console.

Find the entry for Aux Line B.

Enter Flush → Aux Line B → 246.

Aux Line B's ID is 246.

Stop the Regulator

Next, use Camera 002.

Switch to Camera 002.

Find the Regulator Systems area.

Read the number shown on the wall.

Enter the command to stop the Regulator.

The regulator ID is 781.

Unlock the Valve F Door

Use Camera 004 to find the door leading to Valve F.

Switch to Camera 004.

Find the Valve F door.

Read the ID above the door.

Enter Unlock → Valve F Door → 592.

Valve F door ID: 592.

Open Valve F

After unlocking the door, leave the Control Room.

Go downstairs to the Valve F area.

Find the large red valve wheel.

Turn the wheel manually.

Return to the Control Room.

This completes the Remote Systems sequence and allows you to proceed to the final Clamp Release Procedure.

Final Thoughts

The Silent Hill: Townfall CCTV Puzzle is easier once you understand the numbers are equipment IDs, not ordinary door codes. Follow the sequence Valve B → Filter A → AUX Lines → Aux Line B → Regulator → Valve F, completing the physical tasks between each console command.

FAQ

Q. What is the CCTV Puzzle sequence?

A. The sequence is Open Valve B → Start Filter A → solve the Auxiliary Lines → Flush Aux Line B → Stop the Regulator → Unlock Valve F.

Q. What is the Valve B ID?

A. Valve B's ID is 254.

Q. What is the Filter A ID?

A. Filter A's ID is 103.

Q. What is the AUX locker code?

A. The AUX locker code is 0825.

Q. What is the Aux Line B ID?

A. The Aux Line B ID is 246.

Q. What is the Valve F door code?

A. The Valve F door ID is 592.

Q. What happens after the CCTV Puzzle?

A. After unlocking the Valve F door, manually turn Valve F, return to the Control Room, and complete the Clamp Release Procedure to continue.