007 First Light Guide | How to Bypass Sensors in Perch

Here’s a guide on how to bypass the Sensors in Perch in 007 First Light.

Game Guide by TauxicPandA on Jun 05, 2026

Reaching the Perch requires you to navigate through a restricted area while managing security systems. This mission has a unique requirement where you must trigger alarms to proceed, which can be confusing.

007 First Light, Guide, How to Bypass Sensors in Perch

Moving Through the Vents

Find the air vent near the start of the area. You and Greenway must work together to push a small box out of the way before you can enter. Once you are inside the vent, travel about halfway through until you see a path leading to the left.

While this room is not necessary to finish the mission, you should explore it to find a Collectible and an ID Card. Go to the back corner by the glass wall and pick up the item, then go back to the main hallway.

007 First Light, Guide, How to Bypass Sensors in Perch

Triggering and Disabling Alarms

Return to the hallway to begin the process of tripping the alarms. You will find laser wires blocking your path. Use your Watch on the other side of the glass to unlock the door.

After unlocking the door, crawl back through the air vent to reach the other side of the security system. Once you are there, you can disable the alarm. This action clears the way for you and Greenway to continue the mission in 007 First Light.

Also, check our 007 First Light Review and other guides below: